DumpVDL2 - Historie editací

Tydyt: /* systemctl */

2025-11-02T16:28:06Z

‎systemctl

Tydyt: /* Příprava */

2025-11-02T15:52:19Z

‎Příprava

Tydyt: /* systemctl */

2024-11-28T20:31:49Z

‎systemctl

Tydyt: /* systemctl */

2024-11-26T21:13:47Z

‎systemctl

Tydyt: /* Test */

2024-11-26T21:13:25Z

‎Test

Tydyt: /* systemctl */

2024-11-26T21:09:47Z

‎systemctl

Tydyt: /* Příprava */

2024-11-26T20:58:20Z

‎Příprava

Tydyt: /* systemctl */

2023-12-10T16:08:02Z

‎systemctl

Tydyt: /* systemctl */

2023-12-10T15:54:27Z

‎systemctl

Tydyt: /* systemctl */

2023-12-10T15:52:46Z

‎systemctl

@@ Řádka 57: / Řádka 57: @@
   sudo nano /etc/default/dumpvdl2
-  #!/bin/sh
+  #!/bin/bash
-  # Defaul seting for acarsdec
+  # Defaul seting for dumpvdl2
-  # ==========================
+  # --------------------------
   # RTL dongle number or S/N
-  DEV="0"
+  DEV="1"
   # Set rtl ppm frequency correction
-  PPM="51"
+  PPM="-5"
   # Set rtl preamp gain in tenth of db (ie -g 90 for +9db)..
   # By default use maximum gain
-  GAIN="480"
+  GAIN="48"
   # Format send dat:
-  #  text      - Human readable text
+  #      WHAT:FORMAT:TYPE:PARAMS
   #  pp_acars  - One-line ACARS format accepted by Planeplotter via UDP
-  #  json      - Javascript object notation
+ #  kde WHAT:
-  FORMAT="json"
+ #      "decoded" - output decoded messages
-  # Output protocol:
+  # VHF frequencies f1 and optionally f2 to f8 in hz (specificke kmitocty: 136.100M 136.945M)
- #  udp
+  FREQ="136.650M 136.675M 136.700M 136.725M 136.750M 136.775M 136.800M 136.825M 136.850M 136.875M 136.900M 136.925M 136.950M 136.975M"
-  # VHF frequencies f1 and optionally f2 to f8 in hz
+  # ----------------------------------------- end setting ------------------------------------
- FREQ="136725000 136775000 136800000 136825000 136875000 136975000"
+ # Jednoducha smycka pro spojeni jednotlivych vystupu
-  dumpvdl2 --rtlsdr ${DEV} --gain ${GAIN} --correction ${PPM} --output decoded:${FORMAT}:${PROTOCOL}:address=${SERVER},port=${PORT}  --station-id ${STATIONID}
+ # Vlastni spusteni prikazu ze vsemi parametry
   sudo chmod 775 /etc/default/dumpvdl2

@@ Řádka 5: / Řádka 5: @@
   sudo apt install build-essential cmake git libglib2.0-dev pkg-config
-Nainstalujeme libacars
+Nainstalujeme [[ libacars ]]
   cd
   git clone https://github.com/szpajder/libacars

@@ Řádka 48: / Řádka 48: @@
   [Service]
   Type=simple
-  EnvironmentFile=-/etc/default/dumpvdl2
+  ExecStart=/etc/default/dumpvdl2
   [Install]
@@ Řádka 92: / Řádka 91: @@
   # VHF frequencies f1 and optionally f2 to f8 in hz
   FREQ="136725000 136775000 136800000 136825000 136875000 136975000"
-  sudo chmod 664 /etc/default/dumpvdl2
+  sudo chmod 775 /etc/default/dumpvdl2
   sudo ln -s /etc/default/dumpvdl2 ~/dumpvdl2.conf

← Starší verze		Verze z 26. 11. 2024, 21:13
Řádka 32:		Řádka 32:
	sudo make install		sudo make install

		+
		+	== Test ==
		+	Spuštění pro test
		+	dumpvdl2 --rtlsdr 0 --gain 48 --correction 50 136725000 136775000 136800000 136825000 136875000

	== systemctl ==		== systemctl ==

@@ Řádka 16: / Řádka 16: @@
   sudo make install
   sudo ldconfig
 == Instalace ==

@@ Řádka 20: / Řádka 20: @@
 Spuštění pro test
   dumpvdl2 --rtlsdr 0 --gain 48  --correction 50 136725000 136775000 136800000 136825000 136875000
 == systemctl ==

@@ Řádka 8: / Řádka 8: @@
   cd
   git clone https://github.com/szpajder/libacars
   cd libacars
   mkdir build
   cd build

@@ Řádka 66: / Řádka 66: @@
   #  tcp
   PROTOCOL="udp"
-−
   # Send acars messages to addr:port via UDP
   SERVER="feed.airframes.io"
@@ Řádka 75: / Řádka 75: @@
   # VHF frequencies f1 and optionally f2 to f8 in hz
-  FREQ="136725000 136775000 136800000 136825000 136875000 136975000
+  FREQ="136725000 136775000 136800000 136825000 136875000 136975000"
   sudo chmod 664 /etc/default/dumpvdl2