CzADSB-Mapa

Uvod

Predpokladany postup instalace

• Pripravit si distribuci
• Zkompilovat ReADSB (nepotrebujeme zadne sdr ovladace)
• Nastavit ReADSB
• Nainstalovat Tar1090
• Zkonfigurovat Tar1090

Distribuce

Nebojime se niceho, takze jdeme do nejnovejsiho operacniho systemu, at mame na dlouho klid. Priparvime si komplet distribuci vcetne aktualizaci a ovladaci pro virtual ( Linux & Aplikace ).

WebServer

Pro provoz potrebujeme jeden ze dvou nize uvedenych web serveru. Volba je v podstate na vas, ale Tar1090 ma primo integrovanou podporu pro Lighttpd.

Lighttpd

# prvne nainstalujeme WebServer. Doporu4uje se nginx, nebo lighttpd
sudo apt install lighttpd

Nginx

# prvne nainstalujeme WebServer. Doporu4uje se nginx, nebo lighttpd
sudo apt install nginx

ReADSB

Kompilace

sudo apt update && sudo apt upgrade -y
sudo apt install --no-install-recommends --no-install-suggests -y \
   git build-essential debhelper libusb-1.0-0-dev pkg-config fakeroot libncurses-dev zlib1g-dev libzstd-dev librtlsdr-dev help2man

git clone --depth 20 https://github.com/wiedehopf/readsb.git
cd readsb

rm -f ../readsb_*.deb
export DEB_BUILD_OPTIONS=noddebs

dpkg-buildpackage -b -ui -uc -us

Pokud již máme potřebný balíček, tak jej nainstalujeme:

rm -f /tmp/readsb_*.deb
cp ../readsb_*.deb /tmp/
sudo apt install /tmp/readsb_*.deb
rm -f /tmp/readsb_*.deb

Dale vytvorime pravidlo pro Lighttpd (pokud jsme jej instalovali

sudo wget -q https://rxw.cz/adsb/install/web/64-readsb.conf -O /etc/lighttpd/conf-available/64-readsb.conf
sudo ln -s ../conf-available/64-readsb.conf /etc/lighttpd/conf-enabled/64-readsb.conf
sudo systemctl reload lighttpd.service

Nastaveni ReADSB

# readsb configuration
# This is sourced by /etc/systemd/system/default.target.wants/readsb.service as
# daemon startup configuration.

RECEIVER_OPTIONS="--net --net-only --net-ingest --net-connector 10.0.0.74,30005,beast_in,silent_fail --net-connector 10.129.99.147,30005,beast_in,silent_fail --net-connector 10.0.0.73,30005,beast_in,silent_fail"
DECODER_OPTIONS="--write-json-every 1 --net-beast-reduce-interval 0.5 --net-heartbeat 60 --net-ro-size 1280 --net-ro-interval=0.05 --net-ro-interval-beast-reduce=0.12"
NET_OPTIONS="--net-ro-port 0 --net-sbs-port 0 --net-bi-port 0 --net-bo-port 0 --net-ri-port 0 --net-api-port unix:/run/readsb/api.sock --api-shutdown-delay 10 --tar1090-use-api"

JSON_OPTIONS="--write-receiver-id-json --write-json-every 1 --json-location-accuracy 2 --range-outline-hours 24"

Tar1090

Instalace

# Nainstalujeme vlastni Tar1090
sudo bash -c "$(wget -nv -O - https://github.com/wiedehopf/tar1090/raw/master/install.sh)"
sudo wget -O /usr/local/share/tar1090/aircraft.csv.gz https://github.com/wiedehopf/tar1090-db/raw/csv/aircraft.csv.gz